Search results for 'valves'
-
Water Flow Meter - Acrylic, Brass Fittings
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Water flow values. Viton Seals, 1/8" FNPT and Brass End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 20 mL/min (0.3 GPH) to 1400 mL/min (22 GPH). -
PTFE Utility Needle Valves - Stainless Steel Shell & Bushing
PTFE Utility Needle Valves with Stainless Steel shells and bushings are constructed of PTFE for corrosive gas, liquid, and high purity regulation. Can also be used as bubble tight shut off valves. -
PTFE Utility Needle Valves - Aluminum Shell, Brass Bushing
PTFE Needle Valves with Aluminum shells and Brass bushings are constructed of PTFE and PEEK. External, non-fluid contacting parts are anodized Aluminum. Valves are designed for lab and industrial corrosive gas, liquids, and high purity regulation. They can also be used as shut-off valves. -
Stepping Motor Valve
Stepping Motor Valves (SMV) are designed for high flow regulation of liquids or gases. This line of electronic two-way metering valves has high precision linear stepping motors that drive the valve spindle.
Unlike solenoid operated valves, these Stepping Motor Valves stay cool during operation so there are no control operating problems due to coils heating up. In addition, these valves have extremely fine resolution with standard 0.0005"/step (optional 0.000125"/step available), as well as very low differential pressures and high operating pressures.
-
Proportional Solenoid Valve, 316/416 Stainless Steel, Viton® seals, 1/4" Compression Fittings
Proportional Electromagnetic Valves are designed to respond to variable power inputs to regulate the flow of liquids and gases proportionately. Valves are normally closed for added safety.
Pulse width modulated Driver Modules regulate the power supplied to Proportionating Electromagnetic Valves based on a reference signal. Set-point signals, 0-5 Vdc or 4-20 mA, input are employed to control the output pulse width modulated voltage at a fixed frequency (≈30KHz) and amplitude.
-
65mm Stainless Steel Flow Meter with High Precision Valve (MFV)
Designed for low flow rates, these 65mm Single Tube Brass Flow Meters are precision instruments embodying the inherent simplicity, versatility and economy of the classical variable area meter. They are particularly suitable for metering carrier gases in chromatography, in manufacturing processes, liquid and gas measurements in laboratories, pilot plants, flow and level indicating and controlling gases. This rotameter comes with a High Precision MFV Metering Valve. MFV Valves are ideal for adjusting flow rates whenever high sensitivity control and resolution are desirable, particularly in conjunction with metering tubes of very low flow rates. -
150mm Stainless Steel Flow Meter with High Precision Valve (MFV)
Designed for low flow rates, these 150mm Single Tube Brass Flow Meters are precision instruments embodying the inherent simplicity, versatility and economy of the classical variable area meter. They are particularly suitable for metering carrier gases in chromatography, in manufacturing processes, liquid and gas measurements in laboratories, pilot plants, flow and level indicating and controlling gases. This rotameter comes with a High Precision MFV Metering Valve. MFV Valves are ideal for adjusting flow rates whenever high sensitivity control and resolution are desirable, particularly in conjunction with metering tubes of very low flow rates. -
65mm Stainless Steel Flow Meter with CV Valve
Designed for low flow rates, these 65mm Single Tube Stainless Steel Flow Meters are precision instruments embodying the inherent simplicity, versatility and economy of the classical variable area meter. They are particularly suitable for metering carrier gases in chromatography, in manufacturing processes, liquid and gas measurements in laboratories, pilot plants, flow and level indicating and controlling gases. This rotameter comes with a CV Valve. CV Valves are designed for adjusting flow rates in applications where high resolution metering regulation is not essential. -
150mm Stainless Steel Flow Meter with CV Valve
Designed for low flow rates, these 150mm Single Tube Brass Flow Meters are precision instruments embodying the inherent simplicity, versatility and economy of the classical variable area meter. They are particularly suitable for metering carrier gases in chromatography, in manufacturing processes, liquid and gas measurements in laboratories, pilot plants, flow and level indicating and controlling gases. This rotameter comes with a CV Valve. CV Valves are designed for adjusting flow rates in applications where high resolution metering regulation is not essential. -
High Precision PTFE Needle Valves with Aluminum Shell & Handle
PTFE Needle Valves with Aluminum shells are constructed of PTFE and PEEK. Non-fluid contacting parts are anodized Aluminum. Designed for high flow corrosive gas, liquid, and high purity regulation, , they also perform well with low flow rates. They can also be used as bubble-tight shut-off valves. -
Air Flow Meter - Acrylic, Brass Fittings
Available for multiple flow rates, this Acrylic Flow meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Air flow values. Viton Seals, 1/8" FNPT and Brass End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). -
Oxygen Flow Meter - Acrylic, Stainless Fittings
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Oxygen flow values. Viton Seals, 1/8" FNPT and Stainless Steel End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 1.1 LPM (2.5 SCFH) to 45 LPM (90 SCFH). -
Nitrogen Flow Meter - Acrylic, Stainless Fittings
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Nitrogen flow values. Viton Seals, 1/8" FNPT and Stainless Steel fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 1.3 LPM (2.75 SCFH) to 45 LPM (100 SCFH) -
Helium Flow Meter - Acrylic, Stainless Fittings
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Helium flow values. Viton Seals, 1/8" FNPT and Stainless Steel fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 2.0 LPM (4.0 SCFH) to 110 LPM (250 SCFH). -
Water Flow Meter - Acrylic, Stainless Fittings
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Water flow values. Viton Seals, 1/8" FNPT and Stainless Steel End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 20 mL/min (0.3 GPH) to 1400 mL/min (22 GPH). -
Carbon Dioxide Flow Meter - Acrylic, Brass Fittings
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Carbon Dioxide flow values. Viton Seals, 1/8" FNPT and Brass End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 1.1 LPM (2.5 SCFH) to 35 LPM (80 SCFH). -
Argon Flow Meter - Acrylic, Stainless Fittings
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Argon flow values. Viton Seals, 1/8" FNPT and Stainless Steel End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 1.0 LPM (2.0 SCFH) to 40 LPM (80 SCFH). -
Argon Flow Meter - Acrylic, Brass Fittings
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Argon flow values. Viton Seals, 1/8" FNPT and Brass End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 1.0 LPM (2.0 SCFH) to 40 LPM (80 SCFH).