1-18 of 29

Page:
  1. 1
  2. 2
  1. Oakton Replacement Sensor Cap (WD-35634-09)

    Oakton Replacement Sensor Cap (WD-35634-09)

    Oakton® Replacement Sensor Cap for series 50 testers. Sensors Sold Separately
  2. Dakota Tripod for Single & Multi-Tube Rotameters

    Dakota Tripod for Single & Multi-Tube Rotameters

    When panel-mounting is not an option, a clear acrylic tripod base with built-in spirit leveler and leveling screws that fits all PTFE and standard 65 mm and 150 mm flow meters is offered.
  3.  Digi-Sense Infrared Wand (WD-20250-24)

    Digi-Sense Infrared Wand (WD-20250-24)

    Infrared Wand for Thermocouple Thermometers. 8:1 distance to target ratio. Measures 6-1/2" x 2" x 1-1/2" (16.4 x 5 x 4 cm). Battery included.
  4. Mounting Kits For Totalizer Input/Output Flow Monitor/Controller (TIO) GC Mass Flow Controllers

    Mounting Kits For Totalizer Input/Output Flow Monitor/Controller (TIO) GC Mass Flow Controllers

    Totalizer Input/Output Flow Monitor/Controller Mounting Kits for Mass Flow Controllers
  5. Proportionating Solenoid Valve Driver Module

    Proportionating Solenoid Valve Driver Module

    Pulse Width Modulated, Driver Module, (6APSD0101).
  6. Stepping Motor Valve Connection Cable, 9-Pin Female D-connector, Unterminated Ends,3 feet length (6ACBLSMV)

    Stepping Motor Valve Connection Cable, 9-Pin Female D-connector, Unterminated Ends,3 feet length (6ACBLSMV)

    Stepping Motor Valve 9-Pin D-connector cable , Female, Unterminated Ends, 3 feet length
  7. Cable with 9-pin D-connector for GM series Mass Flow Meter, 0-5 Vdc, 3ft length (6ACBL-D5)

    Cable with 9-pin D-connector for GM series Mass Flow Meter, 0-5 Vdc, 3ft length (6ACBL-D5)

    Cable with 9-pin D-connector for GM series Mass Flow Meter, 0-5 Vdc, 3 feet length (6ACBL-D5)
  8. Oakton® Replacement pH Sensor for Testr 3, 3+, 10, 20 and 30 Double Junction (WD-35624-38)

    Oakton® Replacement pH Sensor for Testr 3, 3+, 10, 20 and 30 Double Junction (WD-35624-38)

    Oakton® Replacement pH Sensor for Testr 3, 3+, 10, 20 and 30 Double Junction
  9. Shielded Cable, 15-pin D-connector with terminated end for GC series mass flow controller, 8ft length (6ACBLGCD)

    Shielded Cable, 15-pin D-connector with terminated end for GC series mass flow controller, 8ft length (6ACBLGCD)

    Shielded Cable 15-pin D-connector with terminated end for GC series mass flow controller, 8ft length (6ACBLGCD)
  10. Calibration pH Buffer Pack, 500 ml each of 4.01 pH, 7.00 pH & 10.00 pH solutions (WD-05942-10)

    Calibration pH Buffer Pack, 500 ml each of 4.01 pH, 7.00 pH & 10.00 pH solutions (WD-05942-10)

    This pack contains 500 ml each of 4.01 pH, 7.00 pH & 10.00 pH solutions.
  11. Totalizer Input/Output Flow Monitor/Controller - Display Readout, 0-5Vdc/0-5Vdc RS-232 Interface (GC Series)

    Totalizer Input/Output Flow Monitor/Controller - Display Readout, 0-5Vdc/0-5Vdc RS-232 Interface (GC Series)

    Displaying instantaneous total and accumulated flow rates, the TIO offers up to 47 different volumetric and mass flow engineering units, a built-in Flow Linearizer, flow alarms and digital RS-232 or RS-485 among its many features.
  12. Oakton Replacement CUP-STYLE Conductivity Sensor (WD-35634-07)

    Oakton Replacement CUP-STYLE Conductivity Sensor (WD-35634-07)

    Replacement Cup-style conductivity sensor of Model WD-35634-65 Oakton Waterproof CTSTestr 50C
  13. Power Supply for GM Series Mass Flow Meters

    Power Supply for GM Series Mass Flow Meters

    Power Supply for GM Series Mass Flow Meters
  14. Power Supply for Porportionating Solenoid Valve Driver Module

    Power Supply for Porportionating Solenoid Valve Driver Module

    Power Supply for Porportionating Solenoid Valve Driver Module 24Vdc
  15. Female 9-Pin D Connector Cable with 6 feet length (6ACBLDP9-6)

    Female 9-Pin D Connector Cable with 6 feet length (6ACBLDP9-6)

    Female 9-Pin D Connector Cab;e with 6 feet length (6ACBLDP9-6) for Pulse Width Modulated Driver Module
  16. Oakton Replacement pHTestr 50 Sensor WD-35634-17

    Oakton Replacement pH Testr Sensor (WD-35634-17)

    Oakton Replacement Sensor for pHTestr 50 Model 35634-15
  17. Power Supply for GC Series Mass Flow Controllers

    Power Supply for GC Series Mass Flow Controllers

    Power Supply for GC Series Mass Flow Controllers
  18. Oakton Replacement pH Spear Sensor for Model WD-35634-25

    Oakton Replacement pH Spear Sensor (WD-35634-27)

    Replacement pH spear sensor for Oakton Waterpoof pHTester Model WD-35634-25

1-18 of 29

Page:
  1. 1
  2. 2