Accessories

Displaying instantaneous total and accumulated flow rates, the TIO offers up to 47 different volumetric and mass flow engineering units, a built-in Flow Linearizer, flow alarms and digital RS-232 or RS-485 among its many features.

Cable with 9-pin D-connector for GM series Mass Flow Meter, 0-5 Vdc, 3 feet length (6ACBL-D5)

Totalizer Input/Output Flow Monitor/Controller Mounting Kits for Mass Flow Controllers

Pulse Width Modulated, Driver Module, (6APSD0101).

Stepping Motor Valve 9-Pin D-connector cable , Female, Unterminated Ends, 3 feet length

Ideal for general laboratory use, the 4HA1131B is a glass-bodied combination pH electrode with a BNC connector for a quick and easy connection to any BNC pH meter. With a double junction design and the ability to change out contaminated electrolyte, this economical pH electrode ensures great results.

Power Supply for Porportionating Solenoid Valve Driver Module 24Vdc

Power Supply for GM Series Mass Flow Meters

Gel Filled PEI Body pH Electrode with BNC Connector (4HA6XXX meters) The 4HA1230B pH electrode has a PEI body, double junction, and a BNC connector. The spherical pH sensing portion is made with general purpose glass, suitable for most pH measurements, and is protected by an extension of the durable PEI body.

Female 9-Pin D Connector Cab;e with 6 feet length (6ACBLDP9-6) for Pulse Width Modulated Driver Module

Power Supply for GC Series Mass Flow Controllers

The 4HA9813-61 and 4HA9810-61 are supplied with the 4HA1285-61 pH/EC/TDS/temperature probe with CAL Check^.™ The pH, EC, TDS, and temperature sensor are housed in a single body that connects to the meter with a DIN connector.

Hanna Instruments offers a wide variety of electrodes that are designed for many different applications. The sensing material, body material, and connection type used are just some of the design considerations. 4HA1285-6

The 4HA1271 is the Spare pH Electrode for 4HA98100 / 4HA98103 Checker^® pH meters. Replacing the pH electrode is both quick and easy. Simply unscrew the old probe to be replaced and screw on the new one. The 4HA1271 is a single junction pH electrode that has a slim 8 mm polypropylene body that easily fits into test tube and other small sized vessels.

The 4HA73127 spare pH sensor makes electrode replacement quick and easy. The spare pH sensor is designed as an easy-fit cartridge that locks into place, featuring two o-rings to maintain a watertight seal. With no pins to line up or that can break, this sensor is ideal for quick replacements.

The 4HA700635P is a highly effective cleaning solution that is specially formulated for use with pH electrodes that become coated with wine juice and must deposits. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna's cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly.

4HA73128 is a replacement tool for electrode removal on select Hanna waterproof testers including models - 4HA98120, 4HA98121, 4HA98127, 4HA98128, 4HA98130, 4HA98311, 4HA98312

4.01 / 7.01 / 10.01 pH Value @25°C, (25 pieces X 20 mL Sachets). Each sealed sachet holds just the right amount of solution making every sachet as fresh as the day it was packaged! Perfect for use with testers and portable meters!
pH 4.01 buffer value is widely used in water purification plants, in the food industry, and wherever the pH is expected to be slightly acidic.

pH 7.01 is the most widely used among all buffer solutions. For this reason we have prepared it in a wider variety of sizes to meet your application needs.

pH 10.01 buffer solution is commonly used to calibrate equipment used for analyzing basic samples.