DPC07 Series - Differential Pressure Mass/Volumetric Flow Controllers

DPC mass flow controllers multi-parameter and multi-gas functionality operate locally via optional OLED/Joystick interface, remotely via RS232/RS485 interface or by the optional Modbus RTU interface. High accuracy and resolution are achieved with the differential pressure sensor measuring pressure drop across a laminar flow channel, which is linearly proportional to volumetric flow rate and converted to mass flow using absolute pressure and temperature sensors.

These differential pressure mass flow controllers feature two programmable flow totalizers with batch processing mode (0.5% RD + 0.2% FS) standard accuracy, 200:1 turn down ratio and less than 150 ms response time.

User selectable local, analog, digital or program set point control, automatic zero adjustment (activated via local or communication interface), programmable SSR relay, programmable 0-5Vdc, 0-10Vdc, or 4-20mA analog inputs and outputs, user-programmable pulse output (via SSR) and extensive self diagnostics functionalities make the DPC a cost saving option when compared to acquiring and installing multiple application specific devices.

  • Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature.
  • Multi-Gas functionality: support for 90 different gases and gas mixtures.
  • User Defined Mixture functionality allows creation and storage of 20 custom gas mixtures with up to 5 different gases each.
  • Standard accuracy ± (0.5% RD + 0.2% FS).
  • 200:1 turn-down ratio.
  • Two programmable mass flow rate totalizers.
  • User programmable mass flow rate Pulse Output (via SSR).
  • Low high or range flow, temperature and pressure alarms
  • Extensive Self Diagnostics with status LED or OLED indication.
  • Three user selectable analog input and output interfaces are standard: 0-5Vdc, 0-10Vdc, 4-20mA.
  • Two user selectable digital communication interfaces (RS-232 and RS-484) are standard.
  • Optional Modbus RTU network interface with isolated RS-485 transceiver.
  • User programmable solid state relay with latch option.
  • Universal 12-26Vdc power supply input for DPC07, DPC17, DPC37 and DPC47. 24-26Vdc for DPC57, DPC67 and DPC77
  • Local high contrast OLED (optional) graphic display with joystick control.
  • Free, easy-to-use configuration and calibration software (RS-232/RS-485).
Specifications: DPC Series Precision Digital Mass Flow Controllers
Flow Medium: Please note: DPC Mass Flow Controllers are designed to work only with clean, non-corrosive gases. Never try to control flow rates of liquids with any DPC product.
Calibrations:
Performed at standard conditions [14.7psia (101.4kPa) and 70°F (21.1°C)] unless otherwise requested or stated.
Environmental (Per IEC 664): Installation Level II; Pollution Degree II.
Flow Accuracy (Including Linearity): ±(0.5% RD + 0.2% FS) at calibration temperature and pressure conditions after tare.
Repeatability:
±0.2% of full scale.
Flow Temperature Coefficient:
0.05% of full scale/ °C or better.
Flow Pressure Coefficient:
0.01% of full scale/psi (6.895kPa) or better.
Typical Flow Response Time:
Default 150 ms (adjustable).
Instrument Warm-Up Time:
<5 Seconds.
Maximum Controllable Flow Range:
133% of Full Scale
Operating Range/Turndown Ratio:
0.5% to 100% of Full Scale/200:1
Mass Reference Conditions STP:
70°F & 14.696 PSIA (other available on request).
Maximum Internal Gas Pressure (Static):
120 PSIG.
Maximum Instantaneous Differential Pressure Across Differential Sensor:
12 PSID.
Proof Pressure:
145 PSIG.
Valve Type:
Normally Closed.
Operating Temperature:
-10 to 60°C (14 to 140°F).
Mounting Attitude Sensitivity:
None.
Relative Gas Humidity Range:
0 to 100% (Non-Condensing).
Ingress Protection:
IP40.
Analog Output Signals: Linear 0-5Vdc (3000 ohms minimum load impedance);
Linear 0-10Vdc (5000 ohms minimum load impedance);
Linear 4-20mA (550 ohms maximum load impedance) with power supply ≥ 14Vdc
Analog Set Point (Input Signals): Linear 0-5Vdc, 0-10Vdc (100K input impedance)
Linear 4-20mA (250 Ohm input Impedance).
Transducer Input Power: 12 to 26 Vdc,150mV maximum peak to peak output noise. Power consumption: 250mA maximum for DPC07, DPC17; 300mA Maximum for DPC37, DPC47.
24 to 26 Vdc for DPC57, DPC67, DPC77. Power consumption 650mA maximum, circuit boards have built-in polarity reversal protection: 300mA for DPC07, DPC17, DPC37, DPC47 (750mA for DPC57, DPC67 and DPC77).
Digital Ouput Signals: Standard RS-232 or RS-485 (user selectable). Optional Modbus over isolated RS-485 transceiver.
**Materials In Fluid Contact: 316 stainless steel, 416 stainless steel, high temperature polyamide, alumina ceramic, poxy, silicone, glass, gold. FKM O-rings standard (Optional Buna-N®, EPR® or FFKM O-rings available upon request).
Usually Ships in 4 to 6 Weeks
Item # Item Description Item Price Subtotal Qty
6ADPC07L552-110 0 to 1.0 mL/min 316SS, With OLED Readout, 0-5Vdc Input/0-5Vdc Output, 12-26Vdc Power, RS-232 $1,405.00 $0.00
6ADPC07L552-120 0 to 2.0 mL/min 316SS, With OLED Readout, 0-5Vdc Input/0-5Vdc Output, 12-26Vdc Power, RS-232 $1,405.00 $0.00
6ADPC07L552-125 0 to 2.5 mL/min 316SS, With OLED Readout, 0-5Vdc Input/0-5Vdc Output, 12-26Vdc Power, RS-232 $1,405.00 $0.00
6ADPC07L552-130 0 to 3.0 mL/min 316SS, With OLED Readout, 0-5Vdc Input/0-5Vdc Output, 12-26Vdc Power, RS-232 $1,405.00 $0.00
6ADPC07L552-140 0 to 4.0 mL/min 316SS, With OLED Readout, 0-5Vdc Input/0-5Vdc Output, 12-26Vdc Power, RS-232 $1,405.00 $0.00
6ADPC07L552-150 0 to 5.0 mL/min 316SS, With OLED Readout, 0-5Vdc Input/0-5Vdc Output, 12-26Vdc Power, RS-232 $1,405.00 $0.00
6ADPC07L552-160 0 to 6.0 mL/min 316SS, With OLED Readout, 0-5Vdc Input/0-5Vdc Output, 12-26Vdc Power, RS-232 $1,405.00 $0.00
6ADPC07L552-170 0 to 7.0 mL/min 316SS, With OLED Readout, 0-5Vdc Input/0-5Vdc Output, 12-26Vdc Power, RS-232 $1,405.00 $0.00
6ADPC07L552-210 $0.00 $0.00

* Required Fields

Usually Ships in 4 to 6 Weeks
$1,405.00

* Required Fields