| USA/CAN | 800-879-7713 |
| INTL | 845-770-3200 |
We promise a 100% secure shopping experience.
Dakota
Choose a sub category:
Dakota Rotameters -
GM5 Series - Argon Mass Flow Meter - Aluminum, High Flow, With or Without LCD Readout, 3/8 Inch Compression Fittings, 0-5VDC Analog Output
Dakota's Mass Flow Meters are compact and easy to read. Used in laboratory and industrial settings to measure and read the flow rates of gases. The rugged designed coupled with instrumentation grade accuracy provides versatile and economical means of flow measurement. Aluminum models with readout options of either engineering units (standard) or 0 to 100 percent displays are available.
The mechanical layout of the design includes an LCD readout built into the top of the transducer. This readout module is tiltable over 90 degrees to provide optimal reading comfort. It is connected to the transducer by a standard modular plug, and is also readily removable for remote reading installations.
-
GM5 Series - Helium Mass Flow Meter - Aluminum, High Flow, With or Without LCD Readout, 3/8 Inch Compression Fittings, 0-5VDC Analog Output
Dakota's Mass Flow Meters are compact and easy to read. Used in laboratory and industrial settings to measure and read the flow rates of gases. The rugged designed coupled with instrumentation grade accuracy provides versatile and economical means of flow measurement. Aluminum models with readout options of either engineering units (standard) or 0 to 100 percent displays are available.
The mechanical layout of the design includes an LCD readout built into the top of the transducer. This readout module is tiltable over 90 degrees to provide optimal reading comfort. It is connected to the transducer by a standard modular plug, and is also readily removable for remote reading installations.
-
GM5 Series - Hydrogen Mass Flow Meter - Aluminum, High Flow, With or Without LCD Readout, 3/8 Inch Compression Fittings, 0-5VDC Analog Output
Dakota's Mass Flow Meters are compact and easy to read. Used in laboratory and industrial settings to measure and read the flow rates of gases. The rugged designed coupled with instrumentation grade accuracy provides versatile and economical means of flow measurement. Aluminum models with readout options of either engineering units (standard) or 0 to 100 percent displays are available.
The mechanical layout of the design includes an LCD readout built into the top of the transducer. This readout module is tiltable over 90 degrees to provide optimal reading comfort. It is connected to the transducer by a standard modular plug, and is also readily removable for remote reading installations.
-
GM5 Series - Nitrogen Mass Flow Meter - Aluminum, High Flow, With or Without LCD Readout, 3/8 Inch Compression Fittings, 0-5VDC Analog Output
Dakota's Mass Flow Meters are compact and easy to read. Used in laboratory and industrial settings to measure and read the flow rates of gases. The rugged designed coupled with instrumentation grade accuracy provides versatile and economical means of flow measurement. Aluminum models with readout options of either engineering units (standard) or 0 to 100 percent displays are available.
The mechanical layout of the design includes an LCD readout built into the top of the transducer. This readout module is tiltable over 90 degrees to provide optimal reading comfort. It is connected to the transducer by a standard modular plug, and is also readily removable for remote reading installations.
-
65mm Aluminum Flow Meter, No Valve
Designed for low flow rates, these 65mm Single Tube Aluminum Flow Meters are precision instruments embodying the inherent simplicity, versatility and economy of the classical variable area meter. They are particularly suitable for metering carrier gases in chromatography, in manufacturing processes, liquid and gas measurements in laboratories, pilot plants, flow and level indicating and controlling gases. No Valve. -
65mm Brass Flow Meter, No Valve
Designed for low flow rates, these 65mm Single Tube Brass Flow Meters are precision instruments embodying the inherent simplicity, versatility and economy of the classical variable area meter. They are particularly suitable for metering carrier gases in chromatography, in manufacturing processes, liquid and gas measurements in laboratories, pilot plants, flow and level indicating and controlling gases. No Valve. -
65mm Stainless Steel Flow Meter, No Valve
Designed for low flow rates, these 65mm Single Tube Brass Flow Meters are precision instruments embodying the inherent simplicity, versatility and economy of the classical variable area meter. They are particularly suitable for metering carrier gases in chromatography, in manufacturing processes, liquid and gas measurements in laboratories, pilot plants, flow and level indicating and controlling gases. No Valve. -
Proportional Solenoid Valve, 316/416 Stainless Steel, Viton® seals, 1/4" Compression Fittings
Proportional Electromagnetic Valves are designed to respond to variable power inputs to regulate the flow of liquids and gases proportionately. Valves are normally closed for added safety.
Pulse width modulated Driver Modules regulate the power supplied to Proportionating Electromagnetic Valves based on a reference signal. Set-point signals, 0-5 Vdc or 4-20 mA, input are employed to control the output pulse width modulated voltage at a fixed frequency (≈30KHz) and amplitude.
-
65mm PTFE Encased Glass Tube Flow Meter with CV Utility Valve, 1/8" FNPT Adapter
These rugged 65mm PTFE-Glass Flow Meters offer solutions to low to medium flow range measurements of highly corrosive or ultra-pure liquids and gases. Wetted inert components are surrounded by structurally rigid anodized aluminum. The resultant design represents a unique combination of a rugged mechanically rigid frame and chemically inert wetted parts. This rotameter comes with a CV® Utility Valve Cartridge. CV® Valve Cartridges are designed for adjusting flow rates in applications where high resolution metering regulation is not essential. -
65mm PTFE Encased Glass Tube Flow Meter with MFV High Precision Valve, 1/8" FNPT Adapter
These rugged 65mm PTFE-Glass Flow Meters offer solutions to low to medium flow range measurements of highly corrosive or ultra-pure liquids and gases. Wetted inert components are surrounded by structurally rigid anodized aluminum. The resultant design represents a unique combination of a rugged mechanically rigid frame and chemically inert wetted parts. This rotameter comes with an MFV® High Precision Valve for high sensitivity control and resolution. -
65mm PTFE Encased Glass Tube Flow Meter, 1/8" FNPT Adapter, No Valve
These rugged 65mm PTFE-Glass Flow Meters offer solutions to low to medium flow range measurements of highly corrosive or ultra-pure liquids and gases. Wetted inert components are surrounded by structurally rigid anodized aluminum. The resultant design represents a unique combination of a rugged mechanically rigid frame and chemically inert wetted parts. No Valve. -
Encased Glass Tube In-Line Flow Meter, Brass 3/8" FNPT Adapter, No Valve
Incorporating traditional variable area precision glass technology, these rugged brass in-line flow meters offer accurate and economical solutions to medium flow range measurements. These meters are designed with unique rotatable scales of dual air-water direct reading graduations showing SCFM and SLPM (air), as well as GPM and LPM (water) markings. No Valve. -
Encased Glass Tube In-Line Flow Meter, 316 Stainless Steel 3/8" FNPT Adapter, No Valve
Incorporating traditional variable area precision glass technology, these rugged stainless steel in-line flow meters offer accurate and economical solutions to medium flow range measurements. These meters are designed with unique rotatable scales of dual air-water direct reading graduations showing SCFM and SLPM (air), as well as GPM and LPM (water) markings. No Valve. -
Encased Glass Tube In-Line Flow Meter, PTFE, PTCFE 3/8" FNPT Adapter, No Valve
Incorporating traditional variable area precision glass technology, these rugged PTFE in-line flow meters offer accurate and economical solutions to medium flow range measurements. These meters are designed with unique rotatable scales of dual air-water direct reading graduations showing SCFM and SLPM (air), as well as GPM and LPM (water) markings. No Valve. -
Polysulfone High Volume In-Line Flow Meter - Water (GPM/LPM), No Valve
The 6B0300-H2O is a high volume flow meter offering excellent accuracy and repeatability. Combined with a durable injection molded Polysulfone meter body and connections, this flow meter offers cost effective 316 SS internal parts. This flow meter is designed for inline mounting. With a 1" FNPT connection, this line has a liquid flow range of 0.5 to 40 GPM (2 - 155 LPM). Half unions couple the meter body to the connectors at each end of the flow meter, facilitating both installation and maintenance. -
Polysulfone High Volume In-Line Flow Meter with FNPT PVDF Connections - Water (GPM/LPM)
The 6B06 series flow meter's rib guided polysulfone contains no metal in the fluid path. This makes the flow meter desirable in highly corrosive environments or deionized water applications. The 6B0601-PVDF is equipped with 1" FNPT Adapters. -
GC1 Series - Argon Mass Flow Controller - Aluminum, Low Flow, With or Without LCD Readout, 1/4 Inch Compression Fittings, 0-5VDC Analog Input/Output
Dakota's Mass Flow Controllers are compact, self contained and easy to read. The rugged design and instrumentation grade accuracy provide versatile and economical means of flow control ideal in laboratory and industrial settings. The built-in electromagnetic valve allows the flow to be set to any desired flow rate within range of a particular model. Set points may be controlled either locally or remotely.
Available in flow ranges from 10 mL/min to 1000L/min relative to Nitrogen. Accuracy +/-1% full scale for models up to 100 Liters per minute. -
GC1 Series - Helium Mass Flow Controller - Aluminum, Low Flow, With or Without LCD Readout, 1/4 Inch Compression Fittings, 0-5VDC Analog Input/Output
Dakota's Mass Flow Controllers are compact, self contained and easy to read. The rugged design and instrumentation grade accuracy provide versatile and economical means of flow control ideal in laboratory and industrial settings. The built-in electromagnetic valve allows the flow to be set to any desired flow rate within range of a particular model. Set points may be controlled either locally or remotely.
Available in flow ranges from 10 mL/min to 1000L/min relative to Nitrogen. Accuracy +/-1% full scale for models up to 100 Liters per minute.